FFC series mill
·FFC series mill
·FFC-C series automatic suction pulverizer
  Stainless steel mill
·Stainless steel mill
·9FQ series stainless steel hammer mill
  9FQ series hammer mill
·9FQ series hammer mill
·Zhacao Crusher Series
  Chaff cutter series
·Chaff cutter series
  Liquid nitrogen cryogenic grinder
·Liquid nitrogen cryogenic grinder
  FFL winnowing ultrafine centrifugal mill
·FFL winnowing ultrafine centrifugal mill
  Corn thresher series
·YB series corn thresher
·RDT series corn thresher
  Plastic grinder series
·Plastic grinder series
  Mill cake
·Mill cake

9FQ series hammer mill
 "Rui" brand series of hammer mill 9FQ Qingdao Rui Da Machinery Company Limited, the majority of users would like, on the basis of production for many years on the mill, by the use of stringent design demands new mill manufacture. The machine has the production efficiency easy to use and widely ﹑ ﹑ ﹑ safe and reliable applicability, and other significant advantages of high energy ﹑ ﹑ low power package can be widely used in agriculture, animal husbandry ﹑ ﹑ fishery powder and various straw vine material processing, as well as brewing, chemical products and paper ﹑ manufacture of wood-based panels ﹑ starch flour processing industries such as raw materials pulverized. when working without pre-crushed material class vine stalks can be fed directly to the user industries has brought convenience.
First, the product structure characteristics:
9FQ series mill, the main working parts of the hammer mounted on the rotor, with a variety of pulverized particles of raw materials, is more widely used economic crushing equipment, small size, light weight, easy installation, operation, maintenance, production high efficiency advantages.
Hammer mill is mainly composed of the upper body, lower body part 6, the rotor assembly, screen films, feeding device, chassis and other components, airframe and rotor assembly together form the crushing chamber, the rotor assembly is the main working parts, materials pulverized in the pulverizing chamber is completed.
Second, the principle:
In operation, the processed material from the hopper into the crushing chamber, hit and break the high-speed rotation of the working parts while changing the direction of movement of the material, due to the working parts of the high-speed rotation of the destruction of the deposition material layer, therefore, the material with movement of the rotor, in this process, the particles are subjected to repeated collisions and working parts of the body and collisions between particles, friction, thereby gradually grinding to a geometric diameter less than the diameter of the mesh, under the action of centrifugal force and airflow, the material is crushed leakage through the sieve into the crushing chamber from the discharge port.
The machine, grinding fineness determined by sieve pore size. Users can feed particle size requirements, a reasonable selection screen.
Third, using the native Notes:
1, hammer mill steel bracket should be fixed to the ground
2, the first work to refuel two bearings, non-work overload
3, was mixed with pulverized material should be cleared stones, iron and other hard objects
4, when feed materials, should stand on the side of the mill, in order to prevent the material jumped bullet wound face
5, when the material clogging, should immediately stop the machine running, do not touch the iron rod and pull material
6, pay attention to the direction of rotation before hanging belt, non-inverting
7. Replace the hammer with weigh good, four cards to balance the hammer

2. "Rui" brand series 9FQ hammer mill specifications and technical parameters in Table.
Specifications Model Technical Parameters 9FQ320 9FQ400-20 9FQ400-28 9FQ500-28 9FQ500-32 9FQ500-40 9FQ500-50 9FQ600-50 9FQ600-60
 Productivity 750 1000 1250 1500 1500 1900 2200 2800 3200
(Kg / h) (corn)
Φ2 sieve 
Tons of power consumption(Kwh / t) 10.5 9.8 10 10.5 10.5 10.5 10.5 10.5 10.5
Mesh diameter Φ0.8 Φ1.2 Φ2Φ2.5 Φ3 Φ6 Φ8 Φ10 Φ12
mm Other specifications can be customized
Supporting power 5.5-7.5 7.5-11 11-15 18.5 18.5-22 22 37 45 45-55
Motor or diesel engine of the same power
Spindle speed 4200 4000 4000 3400 3400 3400 3000 3000 3000
r / min
Hammer screen space 7-12 7-12 7-17 7-17 7-19 7-19 7-19 7-19 7-19
Sieve width 200 200 276 276 316 396 400 496 586
Number of hammer 12 12 16 16 18 24 24 30 30
Total Weight(kg) 87 140 151 230 260 275 325 440 480
Note: For special specifications can be customized

















 Copyright: Rui Dai Machinery http://www.qdruida.com                                      Technical Support:Qingdao YiTeng