FFC series mill
·FFC series mill
·FFC-C series automatic suction pulverizer
  Stainless steel mill
·Stainless steel mill
·9FQ series stainless steel hammer mill
  9FQ series hammer mill
·9FQ series hammer mill
·Zhacao Crusher Series
  Chaff cutter series
·Chaff cutter series
  Liquid nitrogen cryogenic grinder
·Liquid nitrogen cryogenic grinder
  Plastic Crusher
·Plastic Crusher
  Powerful Crusher
·Powerful Crusher
  FFL winnowing ultrafine centrifugal mill
·FFL winnowing ultrafine centrifugal mill
  Corn thresher series
·YB series corn thresher
·RDT series corn thresher
 


 
9FQZ series Zhacao grinder

I. Introduction:

9FQZ series Zhacao grinder suitable for straw, corn stover, wheat straw, sweet potato vine, crude fiber cutting and crushing operations crushing small barley, beans, grains and other granular materials, can also be used for sweet potato, potato and other materials loaded block crushing operations. This machine is mainly for the working parts of the hammer mounted on a rotor blade. Having various functions forage crush all kinds of bulk materials, chopped grass, corn stalks, etc., is the economy grinding equipment currently more widely used. With small size, light weight, easy installation, operation, maintenance, production efficiency advantages.

Second, use and characteristics:

9FQZ series Zhacao grinder can be processed straw, cotton stalk, beans, orange, wheat straw, grass and other forage and cereals, but also crushed corn cobs and other practical for planting mushroom fungus friends use. The mill has a close series Zhacao hay, grass rubbing, grinding as one of the features is the large and small farms and family farming ideal chickens, ducks, pigs, cattle, sheep, poultry feed intake. The machine power, high output, simple structure, convenient operation, one person can operate. Processing a wide range of raw materials without length restrictions.

Third, the structure and working principle

1, the machine consists of an upper case, lower case, a gate, into the hopper, angle steel shelf, hammer, tools and other components.

2, crushed, crushed material thickness is controlled by the mesh size, you can switch to a different screen.

3, alone Zhacao, the screen can be extracted.

Fourth, installation and commissioning

1, the machine should be installed on a flat solid work site.

2, according to requirements with the motor installed.

3, the direction of rotation of the belt installation should be preceded by checking whether the index power chaff cutter guillotine cut in the same direction, confirmation and then adjust the belt installation, and make proper belt tension.

4, the former does not start to deal Zhacao dynamic and fixed knife gap inspection and adjustment, and then tighten the bolt

5, various parts of the adjustment to normal, after confirmation, commissioning of power for 2-3 minutes, check all parts for loose fasteners at each rotating parts without abnormal sounds and so on.

Fifth, security operations and maintenance

1, must be familiar with before starting the manual, in accordance with its fixed adjustment and maintenance, the operator must master the structure and functional requirements of the machine.

2, matching power must meet the requirements, are not allowed to privately raise the spindle speed.

3, before starting the operation to check whether the guillotine cutting direction in the same direction, is prohibited boot.

4, need a cutting material shall not be mixed with metals, stones and other hard objects, otherwise it will cause damage to the machine.

5, the machine start after a few hours, to be seen whether the components loose, must regularly bearing butter filling.

6, when the feed stock material, the operator's hand is prohibited near the blade to avoid personal injury accident, feeding should be uniform amount, not too much or too little, when slow fast.

7, at work, such as found in grasses and other blocking fault, should immediately wind up its power, troubleshooting and then carry out the job, the machine is strictly prohibited sick job.

8, the machine when not in long-term, should be kept indoors or shed, to prevent corrosion machine.


BACK `

 
 
 
 Copyright: Rui Dai Machinery http://www.qdruida.com                                      Technical Support:Qingdao YiTeng